Sadly, Canon only provides drivers for this printer not only in rpm
format but specific for RedHat-based systems, so converting them using
alien won't work.
Luckily, I already did the hard work of repackaging the RPMs, so you don't have to :)
iP1800 series package (Gutsy and earlier) :
iP1800 series package (Hardy to ?):
Install only one of the iP1800 packages depending of which version of Xubuntu you're using. I've had reports that these packages don't work on Maverick (10.10)
This driver is subject to the terms of the Canon IJ Printer Driver License, which you must read and agree to before installing. It's the GNU General Public License v2 with additional copyright notices and disclaimers.
Further, this driver is compiled for x86 processors. If you have something else you need to
recompile the driver for your architecture. The source is available from the Canon Australia Support site
Connect your printer to a USB2 port and turn it on. The printer must be connected and turned on before you install the drivers. You can also connect to a USB1 port but will lose two-way communication between the printer and OS.
Install the above packages, beginning with the
common package first, by double-clicking on them.
This will open the package(es) in
GDebi. Click the
Install Package button, and enter your
Or, using the command line:
sudo dpkg -i /path/to/download/location/file_name.deb
Open the CUPS Web Interface by pointing your browser to http://localhost:631/,
Printers tab, then
Modify Printer, then
On the second screen select which device you want to use, select the one that reads something like this:
USB Printer #1 with status readback for Canon IJ.
Canon iP1800 series Ver.2.70 (en) driver and click the
Modify Printer button.
sudo /usr/sbin/invoke-rc.d cupsys restart
Your Canon Pixma iP1800 printer is now ready to rock 'n' roll.
$Xubuntu HOWTO: Get your Canon Pixma iP1800 printer to work; v1.3.7 03.01.2011$
$xubuntu HOWTOs; v1.1.7; 03.12.2008$